| |
Repsol Ibercut 30 A
Translation of the original Spanish. In case of a discrepancy, the Spanish original prevails
Description
A pure, natural paraffin oil with a high refining level that contains anti-wear and oiliness additives. Ibercut A is particularly suitable for work with light materials, such as: Brass, aluminium, copper, cathode copper, duralumin, Zamak and resulpherised and lead plated steel. As it does not contain
free sulphur, it can be used to machine non-ferric materials.
Properties and Recommendations
Its transparency and clear colour allow work areas to be easily seen. Its main applications are: machining light alloys, automatic machining of parts at high speed, drilling, sawing with circular saws, the use of mandrels and milling. Recommended for work with soft and yellow metals.To avoid the appearance of smoke, it is advisable to direct a strong jet on the area of work. High ignition point, meaning it can be used without risk.
Quality level
SO 6743/7 category ISO-L-MHE
Technical characteristics
|
UNITS |
METHOD |
VALUE |
Appearance |
|
|
Light yellow |
Colour |
|
ASTM D 1500 |
<1,5 |
Density at 15oC |
g/ml |
ASTM D 4052 |
0,870 |
Viscosity at 40oC |
cSt |
ASTM D 445 |
24 |
Viscosity at 100oC |
cSt |
ASTM D 445 |
4,3 |
Viscosity rate |
|
ASTM D 2270 |
100 |
Flammability V/A |
oC |
ASTM D 97 |
200 |
Copper corrosion |
|
ASTM D 92 |
1b |
Rust A |
|
ASTM D 665 |
Pass |
Rust B |
|
ASTM D 665 |
Pass |
Overview
Bulk and 185 kg cans.
Hazard identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Minimum precautions should be taken to avoid prolonged contact with the skin. The use of
gloves, visors or glasses is recommended to avoid splashes.
Health and safety risks.
Inhalation: As this product has low volatility, the risk of inhalation is minimal.Ingestion: Do not make an affected person vomit. Supply water. Get medical help. Contact with the skin: Wash thoroughly with soap and water.Eyes: Wash thoroughly with water.General measures: Get medical help.
Fire-fighting measures
No special measures required.Extinction: Foams, dry chemicals, CO2, water spray. Do not apply a jet of water directly, as it could spread the product
Environmental precautions
Danger of physical pollution if spilt (water, coastlines, soil, etc.) due to its floatability and oily consistency that may harm flora and fauna on contact. Prevent the material from entering the water supply. Decontamination and cleaning: Treat as an accidental oil spillage. Avoid dispersion using mechanical barriers and remove with physical or chemical elements.
|
|
